Read about the successes of our Densah® Bur Technology

Emil_Portrait-LRLawrence Gelb, DDS

I used the Densah Burs in the placement of an implant into a narrow ridge in the #7 site. They worked like a charm. The procedure was effortless and totally devoid of the stress we all experience when placing an implant into a narrow ridge in the aesthetic zone. And of course bone grafting was not needed as the Densah Burs left me with an osteotomy having dense internal walls and adequate thickness of buccal and palatal bone.

Emil_Portrait-LREmil Verban, Jr. DDS

“I have found the Densah Burs to be better than advertised.  I place three different brands of implants and have replaced the burs I have used in the past with Densah Burs.
From simple to complex cases, these burs have increased my initial stability as measured with the ISQ meter. I have found them to be “priceless” with my immediate placements.
The versatility of these burs allows me to customize each osteotomy based on the type of bone.  I can cut as well as preserve the bone with a simple change in the direction of my hand piece.  After the implementation of the Densah Burs to my protocol, I could never return to my standard drills and highly recommend these to all dentists placing implants.”

Portrait_Images_PruettMichael Pruett DMD

“We have actually adopted the Densah system for most implant placements in our AEGD/GPR program. We use it for all cases in both mandible and maxilla and not just special cases since we feel that the densah burs are more effective than the regular drills even in a conventional manner, and certainly they allow for more versatility when they are used in the reverse mode for osseodensification.

In our experience we are definitely getting better initial stability and have not had any “spinners” related to oversizing the osteotomy. We have done numerous sinus augmentations (crestal approach technique) with the burs and are getting very predictable results. The haptic feedback of the burs is allowing our residents to build confidence in placing implants in a much quicker time. In ridge expansion cases we have used bone dilators and spreaders prior to using the densah system. With the manual or rotary dilators, operator experience and strength were certainly factors in case success. Now we have leveled the playing field for our residents regardless of their strength and experience in that the densah burs are very effective expanders.”

Steven ReubelSteven Reubel DMD, MS

“The Densah Bur system is everything you said it was. I am thrilled with the fact I can save most of the bone in my surgical site with the ability to compress and enhance bone density and in some cases expand out the buccal plate with increased insertion torque necessary for final positioning. I have gotten excellent stability in marginal areas. I no longer use the traditional implant burs, so if you know of anyone needing traditional burs , I’ve got some for cheap.”

Bret Dyer DDS, MSBret Dyer DDS, MS

“We have enjoyed using the Densah burs. I have found that they are excellent for creating ridge expansion and immediate implant placement. This approach keeps the implant in contact with only native bone rather than graft.”

Isaac D. Tawil DDSIsaac Tawil DDS, MS

“After researching versah technology I finally gave these burs a try. My first case was a narrow ridge, a perfect indication for versah technology. Since then I’ve made densah burs my drilling choice for all indications. Whether it be for narrow ridges or standard drilling protocol, used in forward or reverse these are hands down the best burs I’ve used. They drill a perfect circle every time and out perform all of my current drilling systems. I was skeptical of osseodensification protocol but after seeing its results I have become a believer. Try them and they will make a believer out of you too.”

David Sarment DDS, MSDavid Sarment DDS, MS

“I have used the Densah Burs on probably 10 cases now. Although there is a little learning curve, It does feel natural and I like the idea of not seeing bone coming out any more. In fact, going back to the regular drills becomes too aggressive now. Thank you so much for such an ingenious invention. I am recommending it to everyone I know”

Steven Flinn DDS ​Steven Flinn DDS  David Mach DDS, PHD   David Mach DDS, PHD

“We met Dr. Huwais before he brought his implant bur system to market. We were able to see the procedures and results. We anxiously awaited the burs, and were not disappointed. Seldom does new technology create such a shift in procedure and technique, but the Densah burs do. We see no reason to ever go back to using our old surgical burs. Truly a huge improvement to osteotomy preparation and implant placement.”​

Michael Rivera DDSMichael Rivera DDS

“My first case was a very atrophic maxillary ridge; I know with experience that by using only conventional osteotomy drills there is a “butterfly” or movement of the bone in an upward or outward fashion resulting in possible bone dehiscence.  Utilizing the Densah burs resulted in placement of the dental implants in solid bone without any buccal bone loss. I realized that the reverse motion resulted in the conservation of the bony ridge and wanted to try in denser lower ridge.  The sites were a previously grafted site and an old extraction site adjacent to the graft.  The grafted site was relatively soft and the Densah burs performed beautifully in this “new” bone all in the condensing or reverse mode.  The adjacent socket was dense type I bone and narrower than the recently grafted site.  I did have to utilize the cutting mode to get to depth and utilized the condensing mode as the osteotomy gained size. Both sites allowed me to place the 4.3 mm implants with desired torque at placement. I have placed about a dozen implants utilizing the Densah burs in various bone situations and I am definitely a convert with this technology.  I’ve shown several colleagues and recommend the utilization in many implant situations and highly recommend its use. Thank you, I know I will be ordering another set of burs in the near future and I’m glad to have found your Densah Burs at the AAID meeting in Orlando.  I go to many dental meetings and once in a while a “new” implant tool appears as a must have; The Densah burs are one of those must haves.”

Mark K. Setter​ DDS, MSMark K. Setter​ DDS, MS

“WOW!!!! These work GREAT!!!!! I have used the Densah Burs on several maxillary narrow ridges and found the results to be exceptional. Great Job on this product. I think you have a real winner.”

Rodrigo Neiva DDS, MSRodrigo Neiva DDS, MS

“Versah Osseodensification Burs eliminate the “guessing game” of implant primary stability. They are easy to use and provide predictable clinical results even in critical situations. New and experienced clinicians can benefit from this simplified and efficient osteotomy preparation protocol.”

Ann Marie Hofbauer DMDAnn Marie Hofbauer DMD

“I have used the VERSAH drills on several narrow ridges and was amazed more to see the buccal bone expand and condense before my very eyes. With conventional expansion the bone thins and is delicate whereas with this system the quality improves. Amazing! In these sites I place the implant at 50ncm then must hand torque them down to fully seat–solid beyond belief. I now routinely use these for all my implant cases and I have also found that post-operatively the patients experience less (actually NO) discomfort. The system is just not as traumatic for all involved! Thank you”

To leave a review about our Densah® Bur Technology, please click here to fill out our customer survey.     REV03

Contact Us
Versah, LLC
2500 West Argyle Street, Suite 300
Jackson, Michigan 49202
Toll Free: 844-711-5585